日本奥林巴斯探伤仪 — 接触式探头

The Panametrics-NDT Microscan transducers are frequently used with the Series 25 and Series 35 thickness gages, as well as other commercially available thickness gages, flaw detectors and ultrasonic instrumentation.

Microscan transducer part numbers reflect the connector designation:
RM = Right Angle Microdot®
SM = Straight Microdot
RB = Right Angle BNC
SB = Straight BNC
SU = Straight UHF

When selecting a transducer, please review the chart below or consult the Transducer Frequency Range in the Instruction Manual that was shipped with your gage.

Thickness Gage Model

Transducer Frequency Range

45MG
38DL PLUS

2.0 to 30 MHz

Contact Transducers

One of the advantages of a Panametrics-NDT Microscan contact transducer is its versatility; a single transducer can cover a broad thickness range in many engineering materials. Contact transducers are constructed with the unique WC-5 wearplate for greater durability and a longer life.

Frequency (MHz)	Element inches	Diameter mm	Transducer Part Number		Transducer Part Code
0.5	1	25	M101-SB		U8400017
1	1	25	M102-SB		U8400018
1	0.5	13	M103-SB		U8400020
2.25	0.5	13	M106-RM, M106-SM		U8400023, U8400025
2.25	0.5	13	M1036†		U8400019
5	0.5	13	M109-RM, M109-SM		U8400027, U8400028
5	0.25	6	M110-RM, M110-SM, M110H-RM**		U8400030, U8400031, U8400029
10	0.25	6	M112-RM, M112-SM, M112H-RM**		U8400034, U8400035, U8400033
10	0.125	3	M1016		U8400015
20	0.125	3	M116-RM, M116-SM		U8400038, U8400039
20	0.125	3	M116H-RM*		U8400037

RM = Right Angle Microdot; SM = Straight Microdot; SB = Straight BNC
†High Penetration Transducer *Use with Holder, P/N 2133 **Use with Holder, P/N 2132